Product use

 Ice snow ice machine is a kind of more moisture, moisture content is generally between 15%~25%, the temperature slightly lower than zero degree, good plasticity, easy to use and accumulation, the ice shape for the amorphousparticles Snowflake Ice can infiltrate into a narrow space, fast cooling speed,good effect of the ice bath, the design for the laboratory, especially suitable for use in life science, medicine, agriculture, inspection and quarantine laboratory.

 Product features:

1. operation is simple, one button from the water, ice, ice, extrusion, the snow ice,ice full automatic shutdown. The whole operation process is completed by themicrocomputer control. The corresponding indicating lamp will be displayed,running lights, a refrigerator ice full indicator light will stop running.

2.famous brand compressor, stable and reliable operation

3. cavity diaphragm structure, making high energy efficiency, a large amount of ice

4. full computer control, easy to operate

5. ice storage tank using fluorine free polyurethane foam, insulation

6.refrigerants, R404A

7.configuration of 78x51mm liquid crystal display, real time display of ice making machine operation process

Be equipped with voice prompt system (important status voice prompt reporting)

8.adopts stainless steel, corrosion by

9. system and the casing can be independently separated, convenient repair

Special safety design

1. automatically detect whether the operation to prevent ice skates, skates stuck;

2. external water indicator light will stop;

3.automatic detection of the water inlet temperature, condensing temperature toadjust the production of ice;

4.water stopping and ice full stop, first close the blade refrigeration system,continue their run off after 60 seconds, avoid immediately start system skateshave been frozen.

  Model  Specifications

Installation instructions for use

 1, ice making machine may not be placed outdoor use in outdoor, avoid damp oreasily water shower place

2, ice making machine should be placed no corrosive gas, ventilation good location, the surrounding should have a distance about 200mm, ensure that the machine has good ventilation and heat dissipation

3, ice making machine in place should be adjusted to make the machine footsmooth, first should park 10 hours before boot operation.

4, the drainage pipe should be less than the box body, facilitate the smooth drainage

5, do not pull the temporary line, should be installed and fixed socket

6, must be used to separate the three hole socket, and should have good grounding

7, the supply voltage should be used in 190~240V

8, the use of environmental temperature around 5~35 ℃

9, when handling machine shall be not more than 45 ° tilt, no inversion

10, non professional repair personnel are not allowed to open the machinerepair

11, without modification of the machine

Video link：http://www.guoyi168.com/en/shipin.php?cid=42

Floor type laboratory particles snow ice function efficiency amorphous Snowflake Ice, the ice can infiltrate into a narrow space, fast cooling speed, the effect of the ice bath, the design for the labora

Note: the output is in the room temperature of 20 degrees, the water temperature of 18 degrees under the conditions of determinationtory, especially in life science, medicine, agricult